Modernize GUIX and Depends #2126

Workflow file for this run

.github/workflows/ci-master.yml at f081a83

	name: Continuous Integration on Master
	on:
	push:
	paths-ignore:
	- 'doc/**'
	- '**/README.md'
	branches:
	- '**'
	pull_request:
	paths-ignore:
	- 'doc/**'
	- '**/README.md'
	branches:
	- master
	env:
	SOURCE_ARTIFACT: source
	SOURCE_ARTIFACT_DIR: source
	jobs:
	create-source-distribution:
	name: Create Source Distribution
	runs-on: ubuntu-latest
	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Install Required Packages
	run: \|
	sudo apt-get update
	sudo apt-get install -y libboost-all-dev libdb-dev libdb++-dev libevent-dev bison cmake
	- name: Create Distribution Tarball
	run: \|
	./autogen.sh
	./configure --with-incompatible-bdb ac_cv_lib_tor_tor_main=yes
	make dist
	- name: Download Dependencies
	run: make -C depends download
	- name: Create Dependencies Tarball
	run: tar -czf depends.tar.gz depends
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $SOURCE_ARTIFACT_DIR
	mv depends.tar.gz firo-*.tar.gz $SOURCE_ARTIFACT_DIR
	- name: Upload Artifact
	uses: actions/upload-artifact@v4
	with:
	name: ${{ env.SOURCE_ARTIFACT }}
	path: ${{ env.SOURCE_ARTIFACT_DIR }}
	build-linux-cmake:
	name: build-linux-cmake
	runs-on: ubuntu-latest
	env:
	ARTIFACT_DIR: linux-cmake-binaries
	TEST_LOG_ARTIFACT_DIR: test-logs
	steps:
	- name: Set up Python 3.8
	uses: actions/setup-python@v4
	with:
	python-version: '3.8'
	- name: Checkout
	uses: actions/checkout@v4
	- name: Install Required Packages
	run: \|
	sudo apt-get update
	sudo apt-get install -y python3-zmq cmake build-essential
	- name: Verify ZMQ Installation
	run: \|
	python3 -m pip install --upgrade pip
	python3 -m pip install pyzmq
	- name: Download Dependencies
	run: make -C depends download
	- name: Build Dependencies
	run: make -C depends -j$(nproc)
	- name: Build Firo
	run: \|
	mkdir build
	export HOST_TRIPLET=$(depends/config.guess)
	cmake -DCMAKE_TOOLCHAIN_FILE=$(realpath depends/$HOST_TRIPLET/toolchain.cmake) -DBUILD_CLI=ON -DBUILD_TESTS=ON -DBUILD_GUI=ON -DCMAKE_BUILD_TYPE=Release -DCLIENT_VERSION_IS_RELEASE=true -S$(realpath .) -B$(realpath build)
	cd build && make -j$(nproc)
	- name: Run Unit Tests
	run: \|
	cd build && make test
	- name: Run RPC Tests
	env:
	TIMEOUT: 600
	run: \|
	cp -rf build/bin/* build/src/
	qa/pull-tester/rpc-tests.py -extended
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	mv build/bin/{firo-cli,firo-tx,firod,firo-qt} $ARTIFACT_DIR
	- name: Upload Artifact
	uses: actions/upload-artifact@v4
	with:
	name: linux-cmake-binaries
	path: ${{ env.ARTIFACT_DIR }}
	- name: Prepare Test Logs for Artifact
	if: failure()
	run: \|
	tor_log=$(find . -path '*/tor/test-suite.log' -type f \|\| true)
	firo_log=$(find . -path '*/src/test-suite.log' -type f \|\| true)

	mkdir -p $TEST_LOG_ARTIFACT_DIR

	if test -f $tor_log; then
	mv $tor_log $TEST_LOG_ARTIFACT_DIR/tor.log
	fi

	if test -f $firo_log; then
	mv $firo_log $TEST_LOG_ARTIFACT_DIR/firo.log
	fi
	- name: Upload Test Logs Artifact
	if: failure()
	uses: actions/upload-artifact@v4
	with:
	name: test-linux-cmake-logs
	path: ${{ env.TEST_LOG_ARTIFACT_DIR }}
	build-linux-autotools:
	name: build-linux-autotools
	needs: create-source-distribution
	runs-on: ubuntu-latest
	env:
	ARTIFACT_DIR: linux-autotools-binaries
	TEST_LOG_ARTIFACT_DIR: test-logs
	steps:
	- name: Set up Python 3.8
	uses: actions/setup-python@v4
	with:
	python-version: '3.8'
	- name: Getting Source
	uses: actions/download-artifact@v4
	with:
	name: ${{ env.SOURCE_ARTIFACT }}
	path: ${{ env.SOURCE_ARTIFACT_DIR }}
	- name: Extract Archives
	run: \|
	tar -xzf depends.tar.gz
	tar -xzf firo-*.tar.gz --strip-components=1
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Install Required Packages
	run: \|
	sudo apt-get update
	sudo apt-get install -y python3-zmq
	- name: Verify ZMQ Installation
	run: \|
	python3 -m pip install --upgrade pip
	python3 -m pip install pyzmq
	- name: Build Dependencies
	run: make -C depends -j$(nproc)
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Build Firo
	run: \|
	./configure --disable-jni --enable-tests --with-comparison-tool=no --prefix=$(realpath depends/x86_64-pc-linux-gnu)
	make -j$(nproc)
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Run Unit Tests
	run: make check
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Run RPC Tests
	env:
	TIMEOUT: 600
	run: qa/pull-tester/rpc-tests.py -extended
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	mv $SOURCE_ARTIFACT/src/{firo-cli,firo-tx,firod,qt/firo-qt} $ARTIFACT_DIR
	- name: Upload Artifact
	uses: actions/upload-artifact@v4
	with:
	name: linux-autotools-binaries
	path: ${{ env.ARTIFACT_DIR }}
	- name: Prepare Test Logs for Artifact
	if: failure()
	run: \|
	tor_log=$SOURCE_ARTIFACT/src/tor/test-suite.log
	firo_log=$SOURCE_ARTIFACT/src/test-suite.log

	mkdir -p $TEST_LOG_ARTIFACT_DIR

	if test -f $tor_log; then
	mv $tor_log $TEST_LOG_ARTIFACT_DIR/tor.log
	fi

	if test -f $firo_log; then
	mv $firo_log $TEST_LOG_ARTIFACT_DIR/firo.log
	fi
	- name: Upload Test Logs Artifact
	if: failure()
	uses: actions/upload-artifact@v4
	with:
	name: test-linux-autotools-logs
	path: ${{ env.TEST_LOG_ARTIFACT_DIR }}
	build-windows-autotools:
	name: build-windows-autotools
	needs: create-source-distribution
	runs-on: ubuntu-latest
	env:
	ARTIFACT_DIR: windows-autotools-binaries
	steps:
	- name: Getting Source
	uses: actions/download-artifact@v4
	with:
	name: ${{ env.SOURCE_ARTIFACT }}
	path: ${{ env.SOURCE_ARTIFACT_DIR }}
	- name: Extract Archives
	run: \|
	tar -xzf depends.tar.gz
	tar -xzf firo-*.tar.gz --strip-components=1
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Install Required Packages
	run: \|
	sudo apt-get update
	sudo apt-get install -y g++-mingw-w64-x86-64 gcc-mingw-w64-x86-64
	- name: Switch MinGW GCC and G++ to POSIX Threading
	run: \|
	sudo update-alternatives --set x86_64-w64-mingw32-gcc /usr/bin/x86_64-w64-mingw32-gcc-posix
	sudo update-alternatives --set x86_64-w64-mingw32-g++ /usr/bin/x86_64-w64-mingw32-g++-posix
	- name: Build Dependencies
	run: make -C depends -j$(nproc) HOST=x86_64-w64-mingw32
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Build Firo
	run: \|
	./configure --without-libs --disable-jni --prefix=$(realpath depends/x86_64-w64-mingw32)
	make -j$(nproc)
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	mv $SOURCE_ARTIFACT/src/{firo-cli.exe,firo-tx.exe,firod.exe,qt/firo-qt.exe} $ARTIFACT_DIR
	- name: Upload Artifact
	uses: actions/upload-artifact@v4
	with:
	name: windows-autotools-binaries
	path: ${{ env.ARTIFACT_DIR }}
	build-windows-cmake:
	name: build-windows-cmake
	runs-on: ubuntu-latest
	env:
	ARTIFACT_DIR: windows-cmake-binaries
	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Install Required Packages
	run: \|
	sudo apt-get update
	sudo apt-get install -y g++-mingw-w64-x86-64 gcc-mingw-w64-x86-64 cmake
	- name: Switch MinGW GCC and G++ to POSIX Threading
	run: \|
	sudo update-alternatives --set x86_64-w64-mingw32-gcc /usr/bin/x86_64-w64-mingw32-gcc-posix
	sudo update-alternatives --set x86_64-w64-mingw32-g++ /usr/bin/x86_64-w64-mingw32-g++-posix
	- name: Download Dependencies
	run: make -C depends download
	- name: Build Dependencies
	run: make -C depends -j$(nproc) HOST=x86_64-w64-mingw32
	- name: Build Firo
	run: \|
	mkdir build
	export HOST_TRIPLET=$(x86_64-w64-mingw32-gcc -dumpmachine)
	cmake -DCMAKE_TOOLCHAIN_FILE=$(realpath depends/$HOST_TRIPLET/toolchain.cmake) -DBUILD_CLI=ON -DBUILD_TESTS=OFF -DCMAKE_BUILD_TYPE=Release -DBUILD_GUI=ON -DCLIENT_VERSION_IS_RELEASE=true -S$(realpath .) -B$(realpath build)
	cd build && make -j$(nproc)
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	mv build/bin/{firo-cli.exe,firo-tx.exe,firod.exe,firo-qt.exe} $ARTIFACT_DIR
	- name: Upload Artifact
	uses: actions/upload-artifact@v4
	with:
	name: windows-cmake-binaries
	path: ${{ env.ARTIFACT_DIR }}
	build-mac-cmake:
	name: build-mac-cmake
	runs-on: macos-latest
	env:
	ARTIFACT_DIR: mac-cmake-binaries
	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Use Xcode instead of Command Line Tools
	run: sudo xcode-select -s /Applications/Xcode.app/Contents/Developer
	- name: Set NJOBS variable
	run: \|
	NCPU=$(sysctl -n hw.ncpu)
	JOBS=$((NCPU / 2 > 1 ? NCPU / 2 : 1)) # Use half, but at least 1
	echo "NJOBS=$JOBS" >> $GITHUB_ENV # Persist NJOBS across steps
	echo "Using $JOBS jobs for parallel builds."
	# -j$(sysctl -n hw.activecpu) fails. due to high load on macOS, and crappy github runners.
	- name: Install Required Packages
	run: \|
	if ! command -v pkg-config &> /dev/null; then
	echo "pkg-config not found, installing..."
	brew install pkg-config --force
	else
	echo "pkg-config is already installed"
	fi
	brew install automake coreutils python-setuptools cmake make --force
	# Workaround for macOS: https://github.com/actions/runner/issues/2958
	- name: Install setuptools
	run: sudo -H pip install setuptools
	- name: Download Dependencies
	run: make -C depends download
	- name: Build Dependencies
	run: \|
	make -C depends -j$NJOBS
	- name: Build Firo
	run: \|
	mkdir build
	export HOST_TRIPLET=$(depends/config.guess)
	cmake -DCMAKE_TOOLCHAIN_FILE=$(pwd)/depends/$HOST_TRIPLET/toolchain.cmake -DBUILD_CLI=ON -DBUILD_TESTS=OFF -DBUILD_GUI=ON -DCMAKE_BUILD_TYPE=Release -DCLIENT_VERSION_IS_RELEASE=true -S$(pwd) -B$(pwd)/build
	cd build && make -j$NJOBS
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	mv build/bin/{firo-cli,firo-tx,firod,firo-qt} $ARTIFACT_DIR
	- name: Upload Artifact
	uses: actions/upload-artifact@v4
	with:
	name: mac-cmake-binaries
	path: ${{ env.ARTIFACT_DIR }}
	build-mac-autotools:
	name: build-mac-autotools
	needs: create-source-distribution
	runs-on: macos-latest
	env:
	ARTIFACT_DIR: mac-autotools-binaries
	steps:
	- name: Getting Source
	uses: actions/download-artifact@v4
	with:
	name: ${{ env.SOURCE_ARTIFACT }}
	path: ${{ env.SOURCE_ARTIFACT_DIR }}
	- name: Extract Archives
	run: \|
	tar -xzf depends.tar.gz
	tar -xzf firo-*.tar.gz --strip-components=1
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Use Xcode instead of Command Line Tools
	run: sudo xcode-select -s /Applications/Xcode.app/Contents/Developer
	- name: Install Required Packages
	run: \|
	if ! command -v pkg-config &> /dev/null; then
	echo "pkg-config not found, installing..."
	brew install pkg-config --force
	else
	echo "pkg-config is already installed"
	fi
	brew install automake coreutils python-setuptools --force
	# Workaround for macOS: https://github.com/actions/runner/issues/2958
	- name: Install setuptools
	run: sudo -H pip install setuptools
	- name: Build Dependencies
	run: make -C depends -j$(sysctl -n hw.activecpu)
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Build Firo
	run: \|
	./configure --prefix=`pwd`/depends/`depends/config.guess`
	make -j$(sysctl -n hw.activecpu)
	working-directory: ${{ env.SOURCE_ARTIFACT }}
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	mv $SOURCE_ARTIFACT/src/{firo-cli,firo-tx,firod,qt/firo-qt} $ARTIFACT_DIR
	- name: Upload Artifact
	uses: actions/upload-artifact@v4
	with:
	name: mac-autotools-binaries
	path: ${{ env.ARTIFACT_DIR }}
	build-guix-x86_64-linux-gnu:
	name: build-guix-x86_64-linux-gnu
	runs-on: ubuntu-22.04
	env:
	HOST: x86_64-linux-gnu
	ARTIFACT_DIR: guix-binaries-x86_64-linux-gnu
	SUBSTITUTE_URLS: "http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Set up Python 3.8
	uses: actions/setup-python@v4
	with:
	python-version: '3.8'
	- name: Free Disk Space
	run: \|
	sudo apt-get clean
	sudo rm -rf /var/lib/apt/lists/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /tmp/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /var/cache/*
	sudo rm -rf /var/log/*
	sudo rm -rf /usr/share/dotnet
	sudo rm -rf /usr/local/lib/android
	sudo rm -rf /opt/ghc
	echo "Disk space now: $(df -h / \| tail -1 \| awk '{print $4}')"
	- name: Install Guix
	run: \|
	sudo apt-get update
	sudo apt-get install -y guix
	guix pull --url=https://codeberg.org/guix/guix-mirror --substitute-urls="http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	- name: Run Guix Build
	run: \|
	CORES=$(nproc)
	env HOSTS="${HOST}" \
	ADDITIONAL_GUIX_COMMON_FLAGS="--cores=$CORES --max-jobs=$CORES" ./contrib/guix/guix-build
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	cp -r ./guix-build-/output/${HOST}/ $ARTIFACT_DIR/ \|\| true
	cd $ARTIFACT_DIR
	mv *-gnu.tar.gz x86_64-linux-guix-release-binaries.tar.gz \|\| true
	mv *-gnu-debug.tar.gz x86_64-linux-guix-debug-symbols.tar.gz \|\| true
	mv SHA256SUMS.part x86_64-linux-guix-checksums-sha256 \|\| true
	- name: Upload Release Binaries
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-linux-guix-release-binaries
	path: ${{ env.ARTIFACT_DIR }}/x86_64-linux-guix-release-binaries.tar.gz
	compression-level: 0
	- name: Upload Debug Binaries
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-linux-guix-debug-binaries
	path: \|
	${{ env.ARTIFACT_DIR }}/firo-cli
	${{ env.ARTIFACT_DIR }}/firo-qt
	${{ env.ARTIFACT_DIR }}/firo-tx
	${{ env.ARTIFACT_DIR }}/firod
	${{ env.ARTIFACT_DIR }}/README.md
	compression-level: 6
	- name: Upload Debug Symbols
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-linux-guix-debug-symbols
	path: ${{ env.ARTIFACT_DIR }}/x86_64-linux-guix-debug-symbols.tar.gz
	compression-level: 0
	- name: Upload Check Sums
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-linux-guix-checksums
	path: ${{ env.ARTIFACT_DIR }}/x86_64-linux-guix-checksums-sha256
	compression-level: 0
	build-guix-aarch64-linux-gnu:
	name: build-guix-aarch64-linux-gnu
	runs-on: ubuntu-22.04
	env:
	HOST: aarch64-linux-gnu
	ARTIFACT_DIR: guix-binaries-aarch64-linux-gnu
	SUBSTITUTE_URLS: "http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Set up Python 3.8
	uses: actions/setup-python@v4
	with:
	python-version: '3.8'
	- name: Free Disk Space
	run: \|
	sudo apt-get clean
	sudo rm -rf /var/lib/apt/lists/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /tmp/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /var/cache/*
	sudo rm -rf /var/log/*
	sudo rm -rf /usr/share/dotnet
	sudo rm -rf /usr/local/lib/android
	sudo rm -rf /opt/ghc
	echo "Disk space now: $(df -h / \| tail -1 \| awk '{print $4}')"
	- name: Install Guix
	run: \|
	sudo apt-get update
	sudo apt-get install -y guix
	guix pull --url=https://codeberg.org/guix/guix-mirror --substitute-urls="http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	- name: Run Guix Build
	run: \|
	CORES=$(nproc)
	env HOSTS="${HOST}" \
	ADDITIONAL_GUIX_COMMON_FLAGS="--cores=$CORES --max-jobs=$CORES" ./contrib/guix/guix-build
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	cp -r ./guix-build-/output/${HOST}/ $ARTIFACT_DIR/ \|\| true
	cd $ARTIFACT_DIR
	mv *-gnu.tar.gz aarch64-linux-guix-release-binaries.tar.gz \|\| true
	mv *-gnu-debug.tar.gz aarch64-linux-guix-debug-symbols.tar.gz \|\| true
	mv SHA256SUMS.part aarch64-linux-guix-checksums-sha256 \|\| true
	- name: Upload Release Binaries
	uses: actions/upload-artifact@v4
	with:
	name: aarch64-linux-guix-release-binaries
	path: ${{ env.ARTIFACT_DIR }}/aarch64-linux-guix-release-binaries.tar.gz
	compression-level: 0
	- name: Upload Debug Binaries
	uses: actions/upload-artifact@v4
	with:
	name: aarch64-linux-guix-debug-binaries
	path: \|
	${{ env.ARTIFACT_DIR }}/firo-cli
	${{ env.ARTIFACT_DIR }}/firo-qt
	${{ env.ARTIFACT_DIR }}/firo-tx
	${{ env.ARTIFACT_DIR }}/firod
	${{ env.ARTIFACT_DIR }}/README.md
	compression-level: 6
	- name: Upload Debug Symbols
	uses: actions/upload-artifact@v4
	with:
	name: aarch64-linux-guix-debug-symbols
	path: ${{ env.ARTIFACT_DIR }}/aarch64-linux-guix-debug-symbols.tar.gz
	compression-level: 0
	- name: Upload Check Sums
	uses: actions/upload-artifact@v4
	with:
	name: aarch64-linux-guix-checksums
	path: ${{ env.ARTIFACT_DIR }}/aarch64-linux-guix-checksums-sha256
	build-guix-x86_64-w64-mingw32:
	name: build-guix-x86_64-w64-mingw32
	runs-on: ubuntu-22.04
	env:
	HOST: x86_64-w64-mingw32
	ARTIFACT_DIR: guix-binaries-x86_64-w64-mingw32
	SUBSTITUTE_URLS: "http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Set up Python 3.8
	uses: actions/setup-python@v4
	with:
	python-version: '3.8'
	- name: Free Disk Space
	run: \|
	sudo apt-get clean
	sudo rm -rf /var/lib/apt/lists/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /tmp/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /var/cache/*
	sudo rm -rf /var/log/*
	sudo rm -rf /usr/share/dotnet
	sudo rm -rf /usr/local/lib/android
	sudo rm -rf /opt/ghc
	echo "Disk space now: $(df -h / \| tail -1 \| awk '{print $4}')"
	- name: Install Guix
	run: \|
	sudo apt-get update
	sudo apt-get install -y guix g++-mingw-w64-x86-64 gcc-mingw-w64-x86-64
	guix pull --url=https://codeberg.org/guix/guix-mirror --substitute-urls="http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	- name: Run Guix Build
	run: \|
	CORES=$(nproc)
	env HOSTS="${HOST}" \
	ADDITIONAL_GUIX_COMMON_FLAGS="--cores=$CORES --max-jobs=$CORES" ./contrib/guix/guix-build
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	cp -r ./guix-build-/output/${HOST}/ $ARTIFACT_DIR/ \|\| true
	cd $ARTIFACT_DIR
	mv *-win-unsigned.tar.gz x86_64-win64-guix-setup-sign-bundle.tar.gz \|\| true
	mv *-win64-debug.zip x86_64-win64-guix-debug-symbols.zip \|\| true
	mv *-win64-setup-unsigned.exe x86_64-win64-guix-installer-unsigned.exe \|\| true
	mv *-win64.zip x86_64-win64-guix-release-binaries.zip \|\| true
	mv SHA256SUMS.part x86_64-wind64-guix-checksums-sha256 \|\| true
	- name: Upload Windows Release Binaries
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-win64-guix-release-binaries
	path: ${{ env.ARTIFACT_DIR }}/x86_64-win64-guix-release-binaries.zip
	compression-level: 0
	- name: Upload Windows Debug Symbols
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-win64-guix-debug
	path: ${{ env.ARTIFACT_DIR }}/x86_64-win64-guix-debug-symbols.zip
	compression-level: 0
	- name: Upload Windows Installer (Unsigned)
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-win64-guix-installer
	path: ${{ env.ARTIFACT_DIR }}/x86_64-win64-guix-installer-unsigned.exe
	compression-level: 0
	- name: Upload Windows Setup Sign Bundle
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-win64-guix-setup-sign-bundle
	path: ${{ env.ARTIFACT_DIR }}/x86_64-win64-guix-setup-sign-bundle.tar.gz
	compression-level: 0
	- name: Upload Windows Checksums
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-win64-guix-checksums
	path: ${{ env.ARTIFACT_DIR }}/x86_64-win64-guix-checksums-sha256
	compression-level: 0
	build-guix-arm64-apple-darwin:
	name: build-guix-arm64-apple-darwin
	runs-on: ubuntu-22.04
	env:
	HOST: arm64-apple-darwin
	ARTIFACT_DIR: guix-binaries-arm64-apple-darwin
	SUBSTITUTE_URLS: "http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Download macOS SDK
	run: \|
	wget https://raw.githubusercontent.com/hebasto/artefacts/refs/heads/Xcode/Xcode/Xcode-15.0/Xcode-15.0-15A240d-extracted-SDK-with-libcxx-headers.tar.gz
	- name: Verify macOS SDK SHA256
	run: \|
	echo "c0c2e7bb92c1fee0c4e9f3a485e4530786732d6c6dd9e9f418c282aa6892f55d Xcode-15.0-15A240d-extracted-SDK-with-libcxx-headers.tar.gz" \| sha256sum -c -
	- name: Extract macOS SDK
	run: \|
	mkdir -p depends/SDKs
	tar -xf Xcode-15.0-15A240d-extracted-SDK-with-libcxx-headers.tar.gz -C depends/SDKs/
	- name: Set up Python 3.8
	uses: actions/setup-python@v4
	with:
	python-version: '3.8'
	- name: Free Disk Space
	run: \|
	sudo apt-get clean
	sudo rm -rf /var/lib/apt/lists/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /tmp/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /var/cache/*
	sudo rm -rf /var/log/*
	sudo rm -rf /usr/share/dotnet
	sudo rm -rf /usr/local/lib/android
	sudo rm -rf /opt/ghc
	echo "Disk space now: $(df -h / \| tail -1 \| awk '{print $4}')"
	- name: Install Guix
	run: \|
	sudo apt-get update
	sudo apt-get install -y guix
	guix pull --url=https://codeberg.org/guix/guix-mirror --substitute-urls="http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	- name: Download Dependencies
	run: make -C depends download
	- name: Run Guix Build
	run: \|
	CORES=$(nproc)
	export SDK_PATH="$(pwd)/depends/SDKs"
	env HOSTS="${HOST}" \
	SDK_PATH="$SDK_PATH" \
	ADDITIONAL_GUIX_COMMON_FLAGS="--cores=$CORES --max-jobs=$CORES" ./contrib/guix/guix-build
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	cp -r ./guix-build-/output/${HOST}/ $ARTIFACT_DIR/ \|\| true
	cd $ARTIFACT_DIR
	mv *-osx-unsigned.tar.gz arm64-apple-darwin-sign-bundle.tar.gz \|\| true
	mv Firo-Core.zip arm64-apple-darwin-app-image.zip \|\| true
	mv SHA256SUMS.part arm64-apple-darwin-checksums-sha256 \|\| true
	tar xf firo*arm64-apple-darwin.tar.gz --strip-components=1 \|\| true
	mv share/man . \|\| true
	- name: Upload MacOS Release Binaries
	uses: actions/upload-artifact@v4
	with:
	name: arm64-apple-darwin-release-binaries
	path: \|
	${{ env.ARTIFACT_DIR }}/firo-cli
	${{ env.ARTIFACT_DIR }}/firo-qt
	${{ env.ARTIFACT_DIR }}/firo-tx
	${{ env.ARTIFACT_DIR }}/firod
	${{ env.ARTIFACT_DIR }}/README.md
	${{ env.ARTIFACT_DIR }}/man
	compression-level: 6
	- name: Upload MacOS Sign Bundle
	uses: actions/upload-artifact@v4
	with:
	name: arm64-apple-darwin-sign-bundle
	path: ${{ env.ARTIFACT_DIR }}/arm64-apple-darwin-sign-bundle.tar.gz
	compression-level: 0
	- name: Upload MacOS App Image Zip
	uses: actions/upload-artifact@v4
	with:
	name: arm64-apple-darwin-app-image-zip
	path: ${{ env.ARTIFACT_DIR }}/arm64-apple-darwin-app-image.zip
	compression-level: 0
	- name: Upload Check Sums
	uses: actions/upload-artifact@v4
	with:
	name: arm64-apple-darwin-checksums
	path: ${{ env.ARTIFACT_DIR }}/arm64-apple-darwin-checksums-sha256
	build-guix-x86_64-apple-darwin:
	name: build-guix-x86_64-apple-darwin
	runs-on: ubuntu-22.04
	env:
	HOST: x86_64-apple-darwin
	ARTIFACT_DIR: guix-binaries-x86_64-apple-darwin
	SUBSTITUTE_URLS: "http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	steps:
	- name: Checkout
	uses: actions/checkout@v4
	- name: Download macOS SDK
	run: \|
	wget https://raw.githubusercontent.com/hebasto/artefacts/refs/heads/Xcode/Xcode/Xcode-15.0/Xcode-15.0-15A240d-extracted-SDK-with-libcxx-headers.tar.gz
	- name: Verify macOS SDK SHA256
	run: \|
	echo "c0c2e7bb92c1fee0c4e9f3a485e4530786732d6c6dd9e9f418c282aa6892f55d Xcode-15.0-15A240d-extracted-SDK-with-libcxx-headers.tar.gz" \| sha256sum -c -
	- name: Extract macOS SDK
	run: \|
	mkdir -p depends/SDKs
	tar -xf Xcode-15.0-15A240d-extracted-SDK-with-libcxx-headers.tar.gz -C depends/SDKs/
	- name: Set up Python 3.8
	uses: actions/setup-python@v4
	with:
	python-version: '3.8'
	- name: Free Disk Space
	run: \|
	sudo apt-get clean
	sudo rm -rf /var/lib/apt/lists/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /tmp/*
	sudo rm -rf /var/tmp/*
	sudo rm -rf /var/cache/*
	sudo rm -rf /var/log/*
	sudo rm -rf /usr/share/dotnet
	sudo rm -rf /usr/local/lib/android
	sudo rm -rf /opt/ghc
	echo "Disk space now: $(df -h / \| tail -1 \| awk '{print $4}')"
	- name: Install Guix
	run: \|
	sudo apt-get update
	sudo apt-get install -y guix
	guix pull --url=https://codeberg.org/guix/guix-mirror --substitute-urls="http://git.savannah.gnu.org/git/guix.git http://hydra-guix-129.guix.gnu.org http://ci.guix.gnu.org"
	- name: Download Dependencies
	run: make -C depends download
	- name: Run Guix Build
	run: \|
	CORES=$(nproc)
	export SDK_PATH="$(pwd)/depends/SDKs"
	env HOSTS="${HOST}" \
	SDK_PATH="$SDK_PATH" \
	ADDITIONAL_GUIX_COMMON_FLAGS="--cores=$CORES --max-jobs=$CORES" ./contrib/guix/guix-build
	- name: Prepare Files for Artifact
	run: \|
	mkdir -p $ARTIFACT_DIR
	cp -r ./guix-build-/output/${HOST}/ $ARTIFACT_DIR/ \|\| true
	cd $ARTIFACT_DIR
	mv *-osx-unsigned.tar.gz x86_64-apple-darwin-sign-bundle.tar.gz \|\| true
	mv Firo-Core.zip x86_64-apple-darwin-app-image.zip \|\| true
	mv SHA256SUMS.part x86_64-apple-darwin-checksums-sha256 \|\| true
	tar xf firo*x86_64-apple-darwin.tar.gz --strip-components=1 \|\| true
	mv share/man . \|\| true
	- name: Upload MacOS Release Binaries
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-apple-darwin-release-binaries
	path: \|
	${{ env.ARTIFACT_DIR }}/firo-cli
	${{ env.ARTIFACT_DIR }}/firo-qt
	${{ env.ARTIFACT_DIR }}/firo-tx
	${{ env.ARTIFACT_DIR }}/firod
	${{ env.ARTIFACT_DIR }}/README.md
	${{ env.ARTIFACT_DIR }}/man
	compression-level: 6
	- name: Upload MacOS Sign Bundle
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-apple-darwin-sign-bundle
	path: ${{ env.ARTIFACT_DIR }}/x86_64-apple-darwin-sign-bundle.tar.gz
	compression-level: 0
	- name: Upload MacOS App Image Zip
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-apple-darwin-app-image-zip
	path: ${{ env.ARTIFACT_DIR }}/x86_64-apple-darwin-app-image.zip
	compression-level: 0
	- name: Upload Check Sums
	uses: actions/upload-artifact@v4
	with:
	name: x86_64-apple-darwin-checksums
	path: ${{ env.ARTIFACT_DIR }}/x86_64-apple-darwin-checksums-sha256

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

Modernize GUIX and Depends #2126

Workflow file

Modernize GUIX and Depends #2126

Uh oh!

Jobs

Run details

Workflow file for this run