[bsp][hpmicro] upgrade to bsp v1.10.0, add hpm6p00evk and hpm5e00evk support

- upgraded bsp to v1.10.0
- moved hpm_sdk to rt-thread package
- added support for hpm6p00evk and hpm5e00evk

Signed-off-by: Fan YANG <[email protected]>

Author: helloeagleyang

.github/ALL_BSP_COMPILE.json

@@ -423,7 +423,9 @@
         "hpmicro/hpm5300evk",
         "hpmicro/hpm5301evklite",
         "hpmicro/hpm6800evk",
-        "hpmicro/hpm6e00evk"
+        "hpmicro/hpm6e00evk",
+        "hpmicro/hpm6p00evk",
+        "hpmicro/hpm5e00evk"
       ]
     },
     {

bsp/hpmicro/.ignore_format.yml

@@ -4,11 +4,24 @@
 
 dir_path:
   - hpm6200evk/startup
+  - hpm6200evk/board
   - hpm6300evk/startup
+  - hpm6300evk/board
   - hpm6750evk/startup
+  - hpm6750evk/board
   - hpm6750evk2/startup
+  - hpm6750evk2/board
   - hpm6750evkmini/startup
+  - hpm6750evkmini/board
   - hpm5300evk/startup
+  - hpm5300evk/board
   - hpm5301evklite/startup
+  - hpm5301evklite/board
   - hpm6800evk/startup
-  - libraries/hpm_sdk
+  - hpm6800evk/board
+  - hpm6e00evk/startup
+  - hpm6e00evk/board
+  - hpm6p00evk/startup
+  - hpm6p00evk/board
+  - hpm5e00evk/startup
+  - hpm5e00evk/board

bsp/hpmicro/README.md

@@ -0,0 +1,193 @@
+# HPMicro Board Support Package (BSP) Introduction
+
+[中文页](README_zh.md) |
+
+## Introduction
+
+This document provides an overview of the HPMicro BSPs (Board Support Package) available in the RT-Thread repository. Each BSP is tailored for specific HPMicro development boards, offering necessary drivers and configurations to run RT-Thread seamlessly on RISC-V based HPMicro microcontrollers.
+
+The document consists of the following parts:
+
+- HPMicro BSP Overview
+- Available BSPs
+- Quick Start Guide
+- Common Development Environment Setup
+- References
+
+By reading the Quick Start Guide section, developers can quickly get their hands on any HPMicro BSP and run RT-Thread on the board. Each individual BSP contains detailed documentation for specific board features and advanced usage.
+
+## Available BSPs
+
+Below is a comprehensive list of HPMicro BSPs currently supported:
+
+| BSP Name | Supported Board | MCU | Description |
+|----------|-----------------|-----|-------------|
+| hpm5300evk | HPM5300EVK | HPM5361 | Development board for HPM5300 series |
+| hpm5301evklite | HPM5301EVKLITE | HPM5301 | Lite version development board for HPM5301 |
+| hpm5e00evk | HPM5E00EVK | HPM5E31 | Development board for HPM5E00 series |
+| hpm6200evk | HPM6200EVK | HPM6200 | Development board for HPM6200 series |
+| hpm6300evk | HPM6300EVK | HPM6360 | Development board for HPM6300 series with Ethernet support |
+| hpm6750evk | HPM6750EVK | HPM6750 | Development board for HPM6750 series with dual-core RISC-V |
+| hpm6750evk2 | HPM6750EVK2 | HPM6750 | Second generation development board for HPM6750 series |
+| hpm6750evkmini | HPM6750EVKMINI | HPM6750 | Mini development board for HPM6750 series |
+| hpm6800evk | HPM6800EVK | HPM6800 | Development board for HPM6800 series |
+| hpm6e00evk | HPM6E00EVK | HPM6E00 | Development board for HPM6E00 series |
+| hpm6p00evk | HPM6P00EVK | HPM6P00 | Development board for HPM6P00 series |
+
+## Quick Start Guide
+
+### Prerequisites
+
+Before getting started with any HPMicro BSP, you need to prepare the following development environment:
+
+#### 1. RT-Thread ENV
+- Download and install [RT-Thread ENV](https://www.rt-thread.org/download.html#download-rt-thread-env-tool)
+
+#### 2. RISC-V Toolchain
+- Download the RISC-V toolchain: [riscv32-gnu-toolchain](https://github.com/helloeagleyang/riscv32-gnu-toolchain-win/archive/2022.04.12.zip)
+- Extract it to a specified directory, for example: `C:\DevTools\riscv32-gnu-toolchain`
+- Set environment variable `RTT_RISCV_TOOLCHAIN` to `<TOOLCHAIN_DIR>\bin`
+  - For example: `C:\DevTools\riscv32-gnu-toolchain\bin`
+
+#### 3. OpenOCD for HPMicro
+- Download OpenOCD: [rtt-debugger-support-package](https://github.com/hpmicro/rtt-debugger-support-package/archive/v0.4.0.zip)
+- Extract it to a specified directory, for example: `C:\DevTools\openocd-hpmicro`
+- Set environment variable `OPENOCD_HPMICRO` to `<OPENOCD_HPMICRO_DIR>\bin`
+  - For example: `C:\DevTools\openocd-hpmicro\bin`
+
+### Getting Started with a Specific BSP
+
+1. **Navigate to the desired BSP directory**:
+   ```bash
+   cd rt-thread/bsp/hpmicro/<bsp_name>
+   ```
+
+2. **Configure the project**:
+   - Open RT-Thread ENV command-line
+   - Change directory to the BSP directory
+   - Run `menuconfig` to configure the project
+
+3. **Build the project**:
+   ```bash
+   scons -jN  # N equals to the number of CPU cores
+   ```
+
+4. **Hardware Connection**:
+   - Switch BOOT pin to 2'b00
+   - Connect the `PWR_DEBUG` port to PC via TYPE-C cable
+
+5. **Download and Debug**:
+   - Use the provided OpenOCD scripts for downloading and debugging
+   - Refer to individual BSP README files for specific commands
+
+### Running Results
+
+Once the project is successfully downloaded, the system runs automatically. The LED on the board will flash periodically.
+
+Connect the serial port of the board to the PC, communicate with it via a serial terminal tool (115200-8-1-N). Reset the board and the startup information of RT-Thread will be observed:
+
+```
+ \ | /
+- RT -     Thread Operating System
+ / | \     5.2.2 build Aug 16 2025 18:18:18
+ 2006 - 2025 Copyright by RT-Thread team
+msh >
+```
+
+## Common Peripheral Support
+
+Most HPMicro BSPs support the following peripherals:
+
+| **On-board Peripherals** | **Support** | **Note** |
+| ------------------------ | ----------- | -------- |
+| USB                      | √           |          |
+| QSPI Flash               | √           |          |
+| GPIO                     | √           |          |
+| SPI                      | √           |          |
+| I2C                      | √           |          |
+| UART                     | √           |          |
+| PWM                      | √           |          |
+| RTC                      | √           |          |
+| On-Board Debugger        | √           | ft2232   |
+
+Additional peripherals may be supported depending on the specific board:
+- **Ethernet**: Available on 
+  - HPM6300EVK
+  - HPM6750EVK
+  - HPM6750EVK2
+  - HPM6750EVKMINI + ART-Pi Industry IO extension
+  - HPM6800EVK
+  - HPM6E00EVK
+  - HPM6P00EVK
+  - HPM5E00EVK
+- **CAN**: Available on HPM6750 series Development Boards, HPM5300EVK, HPM6800EVK, HPM6E00EVK, HPM6P00EVK and HPM5E00EVK
+- **SDIO**: Available on HPM6300EVK, HPM6750EVKMINI, HPM6750EVK, HPM6750EVK2 and HPM6800EVK
+- **Display/Audio**: Available on HPM6750EVK, HPM6800EVK, HPM6E00EVK，HPM6P00EVK
+
+## Development Environment Setup
+
+
+### Using Command Line Tools
+
+1. Set up the environment variables as described in the Prerequisites section
+2. Use `scons` for building
+3. Use OpenOCD and GDB for debugging or use the Ozone + JLink for debugging
+
+## Individual BSP Documentation
+
+Each BSP contains its own detailed README file with:
+- Board-specific hardware information
+- Peripheral configuration details
+- Specific download and debug commands
+- Advanced features and examples
+
+Please refer to the individual BSP directories for detailed documentation:
+- `hpm5300evk/README.md`
+- `hpm5301evklite/README.md`
+- `hpm5e00evk/README.md`
+- `hpm6200evk/README.md`
+- `hpm6300evk/README.md`
+- `hpm6750evk/README.md`
+- `hpm6750evk2/README.md`
+- `hpm6750evkmini/README.md`
+- `hpm6800evk/README.md`
+- `hpm6e00evk/README.md`
+- `hpm6p00evk/README.md`
+
+## Troubleshooting
+
+### Common Issues
+
+1. **Toolchain not found**: Ensure `RTT_RISCV_TOOLCHAIN` environment variable is set correctly
+2. **OpenOCD connection failed**: Check USB connection and driver installation
+3. **Build errors**: Verify all dependencies are installed and environment variables are set
+4. **Serial communication issues**: Check baud rate (115200) and COM port settings
+
+### Getting Help
+
+- Check the individual BSP README files for board-specific issues
+- Visit [RT-Thread Community](https://club.rt-thread.org/)
+- Refer to [RT-Thread Documentation](https://www.rt-thread.org/document/site/)
+
+## References
+
+- [RT-Thread Document Center](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/README)
+- [RT-Thread ENV](https://github.com/RT-Thread/rtthread-manual-doc/blob/master/env/env.md)
+- [HPMicro Official Website](https://www.hpmicro.com/)
+- [HPMicro SDK Documentation](https://hpmicro.github.io/)
+- [RISC-V Toolchain](https://github.com/riscv/riscv-gnu-toolchain)
+
+## Contributing
+
+Contributions to enhance existing BSPs or add new ones are welcome. Please follow the RT-Thread contribution guidelines and ensure that your BSP adheres to the project's standards.
+
+For contributing to HPMicro BSPs:
+1. Fork the `RT-Thread` repository
+2. Create a feature branch
+3. Make your changes following the existing code style
+4. Test your changes thoroughly
+5. Submit a pull request with a clear description
+
+## License
+
+This BSP is released under the [RT-Thread license](https://github.com/RT-Thread/rt-thread/blob/master/LICENSE).